Caterpillar WHEEL LOADERS 992G - catalog of spare parts
Dimensions *
Ground clearance - 2.3 feet in
Width - Over Tires - 14.9 Feet in
Total length - HL - 53.3 feet in
Height - Upper Exhaust Pipe - 17.2 ft.
Height - Top ROPS / FOPS - 18.4 feet in
Reach the maximum Lift / Dump - Std - 7.9 feet in
Ground clearance at maximum lift / unload - standard - 18.4 feet per
Wheelbase Length - 19.4 Feet
Total Length - Standard - 51.3 Feet in
Turning circle - standard - 73.1 feet in
Turning circle - HL - 75.1 feet in
Direct Static Tipping Load - Standard - 132921 lbs
Hinge Axis Height at Full Rise - Standard - 22.8 ft.
Direct Static Tipping Load - HL - 129395.8lb
Height - Top of Hood - 13.1 Feet in
Pivot Bucket - Maximum Lift - Standard - 22.8 Feet
Length - from rear axle to bumper - 13.8 feet in
Total Height - Raised Bucket - Standard - 30.9 ft.
Full-load static tipping load at 43 degrees - 113,299.9 pounds
Discharge clearance with full lift and unload 45 degrees - standard - 15.2 feet per
Achieve a 45 degree full lift and reset - standard - 7.6 feet per
Reach Full Lift and 45 Degree Reset - HL - 7.6 ft.
Unloading clearance at full rise and unloading of 45 degrees - altitude - 17.3 feet in
Static Tipping Load at Full Turn at 40 Degrees - Altitude - 111818.4 pounds
Total height - with bucket raised - 30.9 feet in
Choose WHEEL LOADERS 992G section:
| 5P3723 | 5P3723 | Caterpillar | View |
| 8P7246 | 8P7246 | Caterpillar | View |
| 8P3134 | GEAR | Caterpillar | View |
| 5P8044 | BRG | Caterpillar | View |
| 5P7843 | CUP | Caterpillar | View |
| 5P6727 | BEARING A | Caterpillar | View |
| 5P3088 | CONE | Caterpillar | View |
| 5P3087 | CUP | Caterpillar | View |
| 3P7563 | GEAR - SUN 38TEETH | Caterpillar | View |
| 3P7564 | SUN GEAR | Caterpillar | View |
| 4W0419 | CORE G | Caterpillar | View |
| 6Y4280 | CONE-BEARING | Caterpillar | View |
| 1P4694 | CONE | Caterpillar | View |
| 1P4693 | CUP | Caterpillar | View |
| 8T2275 | 8T2275 | Caterpillar | View |
| 1P4696 | BEARING | Caterpillar | View |
| 1P4695 | CUP | Caterpillar | View |
| 5P7538 | 5P7538 | Caterpillar | View |
| 8S0490 | 8S0490 | Caterpillar | View |
| 5P6408 | 5P6408 | Caterpillar | View |
| 5P1669 | 5P1669 | Caterpillar | View |
| 7W8145 | GASKET | Caterpillar | View |
| 7W0050 | COVER A | Caterpillar | View |
| 2W6619 | SHAFT A | Caterpillar | View |
| 2W5476 | SHAFT A | Caterpillar | View |
| 1P1367 | PLUNGER | Caterpillar | View |
| 5P7807 | BEARING | Caterpillar | View |
| 3P1210 | CONE | Caterpillar | View |
| 7T9755 | CUP-BEARING | Caterpillar | View |
| 4V8410 | 4V8410 | Caterpillar | View |
| 5P8043 | 5P8043 | Caterpillar | View |
Specifications
engine
The number of cylinders - 8
Engine make - 2236
Engine Model - 3508B DITA EUI
Net power - 800hp
Gross Power - 880 HP
The measured power @ - 1750 rpm
Rated Speed - 1750 rpm
Displacement - 2105.4 cc
Measured Torque @ - 1300rpm
30% increase in torque
Aspiration - Double Turbocharged
Hole - 6.7 inches
Stroke - 7.5 inches
Engine Model - Cat 3508B EUI
Net Power - Caterpillar - 800.6 HP
Operational
Working Weight - 209,278 pounds
Fuel capacity - 413 gallons
Hydraulic system capacity - 84.8 gal
Engine oil volume - 26.5 gal
Cooling system capacity - 53.9 gal
Transmission fluid capacity - 44.6 gal
The fluid volume of the front axle / differential is 91 gal
Liquid capacity of the rear axle / differential - 86gal
Static Tipping Weight - 132921 lbs
Turn radius - 36.5 feet in
Operating voltage - 24 V
Generator current strength - 100 amperes
Rear Axle Fluctuation - 20 degrees
Tire size - 45/65 50 layers
Transmission
Transmission Type - Powershift
Transmission Type - Planetary Powershift
Number of forward gears - 3
Number of reverse gears - 3
Top Speed - Forward - 13.5 Mph
Max. Speed - Reverse - 14.9 mph
Forward - 1 - 4.1 mph
Ahead - 2 - 7.2 mph
Forward - 3 - 12.4 mph
Reverse - 1 - 4.6mph
Reverse - 2 - 7.9 mph
Reverse - 3 - 13.7 mph
Steering
Steering - Articulation
Steering angle - in each direction - 43 degrees
Pressure Relief Valve Installation - 4496.17 psi
Minimum turning radius - above the bucket - 438.5 inches
Buckets
Maximum bucket capacity - 16yd3
Bucket volume - 11.5-12.3 m3 15-16 cubic meters
Bucket Width - 15.9 Feet in
Hydraulic system
Safety Valve Installation - 4500
Raising time - 9.2sec
Dump time - 3.3 sec.
Lowering Time - 3.5 s
Bucket
The power of separation - 138360 pounds
Discharge clearance at maximum lift - 15.2 feet per
Bucket Width - 15.9 Feet in
Bucket Capacity - Piled - 15yd3
Bucket Capacity - Pierced - 12.4yd3
Dimensions
Length with bucket on the ground - 51.2 feet in
Tire Width - 14.9 Feet in
Height to Cab Top - 18.4 Feet in
Ground clearance - 2.3 feet in
Wheelbase - 19.4 feet in
Articulated Finger - Maximum Height - 22.8 Feet
Reach at Max Lift and Dump - 7.6 feet in
Operational characteristics
Cat Truck Match - Standard - 777D
Static Tipping Load - Full Turn - 112,777 lbs
Mine clearance - 19 feet in
The power of separation - 237825 pounds
Joint angle - 43 degrees
Nominal Payload - 42,920 lbs
Nominal Payload - Standard - 42,920 lbs
Speed 14.5 mph
Service replenishment options
Cooling system - 76.7 gal
Fuel tank - 413 gal
Carter - 27gal
Hydraulic system including tank - 231.7 gallons
Transmission - 44.7 gal
Differential - Last gear - forward - 91.2gal
Differential - Last gear - Rear - 86.2gal
Fill Hydraulic Plant - 170.7 gal
Hydraulic System - Tank Only - 86.2 Gallons
Hydraulic cycle time
Rise - 9.12 s
Blade - 3.3 s
Total hydraulic cycle time - 15.9 s
Bottom swimming down - empty - 3.47 s
Taxi
Air Conditioner - Standard